평판: 13
1
I replaced the digitizer about 18 months ago. It has been flaky ever since. I reopened it to see if I could fix this problem. Now the symptom is the digits 3,6,9,and cancel will not respond when opening password. This symptom is not now flakey but solidly not functioning. I thoroughly cleaned the connectors per your instructions. My question is, is it the digitizer or the processor. Any ideas?
좋은 질문입니까?
평판: 1.7k
14
7
1
Hey Chuck,
Seems to me like a logic board issue as concurred by @beanman56 . With that being said maybe there are dead spots on the screen which are causing this.
Did this happen after an update or did something happen to the device prior?
IMPORTANT NOTICE:
From Sunday Aus to Friday AUS, i will be unavailable as i am camping then.
이 답변이 도움이 되었나요?
평판: 9.4k
32
20
37
Its the digitizer
i’m 99.5% sure
이 답변이 도움이 되었나요?
Replaced digitizer same problem.
Sounds like its a logic board problem then :/
Like the software or something
지난 24시간: 0
지난 7일: 0
지난 30일: 1
전체 시간: 152
