주요 콘텐츠로 건너뛰기

iPhone 12 mini Rear-Facing Camera/후면 카메라 교체

안내서 선행 작업

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

iPhone 12 mini Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 12 mini 여는 절차

iPhone 12 mini 디스플레이 어셈블리 교체

안내서 정보

= 완료 = 미완료
영어
한국어
    Use this guide to remove and replace the rear cameras in the iPhone 12 mini. Both camera modules are replaced as a single unit.
    ***Note***: On iOS 18 and newer, you can calibrate new, genuine camera modules using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
    You’ll need replacement adhesive to reattach components when reassembling the device.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''*** Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).

      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20mini|iPhone 12 mini Answers community] for help.[br]

      안내서 단계

      1 단계 — 카메라 모듈 커버 풀기

      1.6mm-길이 십자/Phillips #000 나사 두 개를 풀어주세요.

      2 단계 — 카메라 모듈 커버 분리하기

      핀셋을 사용하여 카메라 모듈 커버 브래킷을 분리하세요.

      3 단계 — 카메라 플렉스 케이블 분리하기

      iPhone 12 mini 카메라 플렉스 케이블은 층으로 겹쳐 있으므로 분리와 연결은 올바른 순서로 해야 합니다.

      4 단계

      Spudger/스퍼저를 사용하여 광각 카메라 플렉스 케이블을 소켓에서 똑바로 들어 올려 분리하세요.

      5 단계 — 카메라 모듈 들어 올리기

      Spudger/스퍼저의 뾰족한 끝을 카메라 모듈 상단 가장자리와 iPhone 프레임 사이에 넣으세요.

      6 단계 — 카메라 모듈 분리하기

      핀셋을 사용하여 카메라 모듈을 분리하세요.

      귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.

      OSZAR »