iMac Intel 21.5" Display Adhesive Strips Replacement 단계 #2 기록

#2단계의 변경 사항

편집자 Arthur Shi- 2020년 10월 8일

편집 승인됨 완료자 Arthur Shi

	[title] Remove the old adhesive
-	[* icon_~~caution~~] Before you ~~start placing~~ new adhesive strips, remove all of the old adhesive ~~around~~ the perimeter of the rear enclosure.
+	[* icon_note] Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure.
	[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
	[* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
	[* black] After all the old adhesive is removed, carefully clean off the adhesive residue with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
	[* icon_caution] *Don't skip this step*, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.